Whip Antenna - List of Manufacturers, Suppliers, Companies and Products | IPROS

Whip Antenna Product List

1～30 item / All 30 items

Displayed results
Antenna for 150MHz band radio equipment WH-150-2H-09

Antenna for 150MHz band radio equipment WH-150-2H-09

150MHz band rooftop whip (hole-opening type)

The WH-150-2H-09 (WH1502H09) is a rooftop whip antenna for the 150MHz band manufactured by Nippon Antenna. It is an antenna for radios operating in the 150MHz band. This is a whip antenna that is mounted by drilling holes. It is a product with an L-type connector for mounting holes with a diameter of Φ43 to 45mm. * A whip antenna is one that has no directionality and can receive and transmit signals from any angle. The installation location is the car's rooftop. It features an L-type NJ connector. It is for a specified frequency within the 150MHz band. Please specify the fo (center frequency) in MHz when placing your order. This product complies with safety standards. It is a made-to-order product. Please inquire about the delivery time. Included accessories: 1 tightening ring, 1 tightening tool, and 1 instruction manual. There is also the WH-150-3HA-09 with a straight NJ connector where the element is not bent, and the WH-150-3HA-09 with a straight NJ connector where the element is bent at a 60-degree angle. For extremely low-priced sales of earphone microphones and batteries, please leave it to Excelli. * For more details, please feel free to contact us.

  • others
  • Whip Antenna

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[For License Bureau] HMG-450-3-09EL 450-470MHz

[For License Bureau] HMG-450-3-09EL 450-470MHz

High-gain element magnet antenna for licensed stations that can be used as an antenna for digital simple radio license stations.

The HMG-450-3-09EL 450-470MHz is a high-gain element magnet antenna for licensed stations manufactured by Japan Antenna. It can be used as an antenna (capacitive ground type 3λ/4 whip antenna) for digital simple radio licensed stations. *A whip antenna is one that has no directionality and can receive and transmit signals from any angle. *λ (lambda) refers to wavelength. Please use it in combination with the separately sold mounting bases MG-BA3-09 (with coaxial cable 3D2V) and MG-BA5-09 (with coaxial cable 5D2V). The antenna element length is 48cm, and the weight is 0.6kg. The supported frequency range is 450MHz to 470MHz. It is the same product as the element of the high-gain whip antenna (magnet type) HMG-450-3B-09 for loop tops. Additionally, there is the HMG-450-3-09EL for a specified frequency within 350-470MHz and the HMG-450-3-09EL 350-370MHz for digital simple radio registered stations. *For more details, please feel free to contact us.

  • others
  • Whip Antenna

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Antenna for 400MHz band radio equipment WH-450-3H-09

Antenna for 400MHz band radio equipment WH-450-3H-09

Antenna for a 400MHz band radio device with a hole-mounting installation.

The WH-450-3H-09 (WH4503H09) is a rooftop whip antenna (hole-mount type) manufactured by Nippon Antenna for the 400MHz band. It is an antenna for radios operating in the 400MHz band. This is a whip antenna that requires hole mounting. The mounting hole diameter is φ23mm, and the thickness of the mounting plate should be 15mm or less. The installation location is on the car's rooftop. * A whip antenna is one that has no directionality and can receive and transmit signals from any angle. It features an NJ connector. It operates at a specified frequency within the 400MHz range. Please specify the center frequency (fo) in MHz when placing your order. It is a product that complies with safety standards. This is a made-to-order product. Please inquire about the delivery time. Included accessories: One instruction manual. * For more details, please feel free to contact us.

  • others
  • Whip Antenna

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Vehicle-mounted high-gain gutter antenna HGB-450-3A-09

Vehicle-mounted high-gain gutter antenna HGB-450-3A-09

Garter-mounted whip antenna

The HGB-450-3A-09 (HGB4503A09) is a high-gain gutter antenna for vehicles manufactured by Nippon Antenna, designed for the 400MHz band. The supported frequency range is 350 to 470MHz, and please specify the frequency when purchasing. - Frequency 350-470MHz band: HGB-450-3A-09 f:350-370 (set) - Frequency 365-387MHz band: HGB-450-3A-09 f:365-387 (set) - Frequency 370-390MHz band: HGB-450-3A-09 f:370-390 (set) - Frequency 410-430MHz band: HGB-450-3A-09 f:410-430 (set) - Frequency 430-450MHz band: HGB-450-3A-09 f:430-450 (set) - Frequency 450-470MHz band: HGB-450-3A-09 f:450-470 (set) For more details, please feel free to contact us.

  • others
  • Whip Antenna

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
150MHz Band Element SBR-150S-7-09EL

150MHz Band Element SBR-150S-7-09EL

Capacitively grounded λ/4 whip antenna for 150MHz band radio equipment.

The SBR-150S-7-09EL (SBR150S709EL) is a 150MHz band element manufactured by Nippon Antenna. It is a capacitive grounded λ/4 whip antenna for 150MHz band radios. It features a shortened element. * A whip antenna is defined as an antenna that has no directionality and can receive and transmit signals from any angle. It is a specified frequency for the 150MHz band. Please indicate the fo (center frequency) in MHz when placing your order. The feed point connector is an M6 female thread. Please use it in combination with the separately sold bases SBR-BA3-09 and SBR-BA5-09. * A hex wrench is required for base installation. * For more details, please feel free to contact us.

  • others
  • Whip Antenna

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
High Gain Element HGW-400-PS-09 365-385

High Gain Element HGW-400-PS-09 365-385

400MHz band high-gain element for vehicle-mounted radios (5/8λ type) in the frequency range of 365MHz to 385MHz (MP type)

The HGW-400-PS-09 365-385 (HGW400PS09) is a high-gain element (5/8λ type) for the 400MHz band manufactured by Nippon Antenna. * A whip antenna is defined as an antenna that has no directionality and can receive and transmit signals from any angle. ● It can be used with vehicle-mounted radios operating in the 365MHz to 385MHz range. ● It is a 5λ/8 collapsible whip antenna for the 400MHz band. ● The collapsible mechanism allows for 90 degrees to the left and right, and rotation from 0 to 360 degrees. ● It is equipped with an M.P type connector. ● This is just the antenna element, so it must be used in combination with a separately sold antenna base. * For more details, please feel free to contact us.

  • others
  • Whip Antenna

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
150MHz Band Element WH-150-84(HE)-09EL

150MHz Band Element WH-150-84(HE)-09EL

Capacitively grounded λ/4 whip antenna for 150MHz band radio equipment.

● The WH-150-84(HE)-09EL is a 150MHz band element manufactured by Nippon Antenna. ● It is a capacitively grounded λ/4 whip antenna for 150MHz band radios. * A whip antenna is one that has no directivity and can receive and transmit signals from any angle. ● It is designed for a specified frequency within the range of 140 to 170MHz. Please specify the fo (center frequency) in MHz when placing your order. ● It is a hole-mount type shortened 150MHz band element. ● The feeding part connector is an M6×1 female thread. It is used in combination with the separately sold WH-84-09 kit. * For more details, please feel free to contact us.

  • others
  • Whip Antenna

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Vehicle-mounted magnet element MG-060L-09EL

Vehicle-mounted magnet element MG-060L-09EL

Magnet-mounted short-type element for 60MHz band radio equipment.

The MG-060L-09EL (MG060L09EL) is a 60MHz band vehicle-mounted magnetic element manufactured by Nippon Antenna. It is a magnet-mounted, shortened element for radios operating in the 60MHz band. * A whip antenna is an antenna that has no directionality and can receive and transmit signals from any angle. * λ (lambda) refers to wavelength. * This is a specified frequency within the 60MHz band. Please specify the fo (center frequency) in MHz when placing your order. * The connector is an M6×1 female thread. * The coaxial cable and base are sold separately. They are to be used in combination with MG-BA3-09 or MG-BA5-09. * For more details, please feel free to contact us.

  • others
  • Whip Antenna

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Vehicle-mounted gutter whip antenna GB-450A(CF)-09

Vehicle-mounted gutter whip antenna GB-450A(CF)-09

Designed exclusively for Toyota Comfort! A high-efficiency vehicle whip antenna compatible with the 400MHz band, featuring a 3/4λ design. Easy to install with a gutter mount and wiring!

The GB-450A(CF)-09 is a 400MHz band vehicle-mounted whip antenna (3D-2V) manufactured by Nippon Antenna. It is designed for the Toyota Comfort. This is a 3/4λ whip antenna for vehicle-mounted radios. A whip antenna is one that has no directionality and can receive and transmit signals from any angle. The absolute gain is 2.15dB. It comes with an antenna element, a magnetic base, and a 3D-2V coaxial cable (5m). Note that connectors are not included. It features an attachment method that makes it easy to run cables, so after running the cable, you will need to attach a separately sold connector to connect it to the radio. It is mounted on the roof side. It operates on a specified frequency within the range of 350 to 470MHz. For more details, please feel free to contact us.

  • others
  • Whip Antenna

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[AM and Shortwave Radio Compatible] WH-025A(F) (Set)

[AM and Shortwave Radio Compatible] WH-025A(F) (Set)

Wide compatibility from AM broadcasting to shortwave broadcasting! Achieve high-sensitivity reception with a highly durable outdoor whip antenna!

The WH-025A(F)(set) is an AM whip antenna manufactured by Nippon Antenna. It is a high-performance whip antenna for radio reception that can receive broadcasts from the AM band to the shortwave band with high sensitivity. *A whip antenna is defined as an antenna that has no directionality and can receive and transmit signals from any angle. The elements are made of strong stainless steel, providing excellent durability, and the main body is treated to prevent rust and corrosion. The feeding part at the base of the antenna uses an F-J connector, which is sold separately. It is also possible to waterproof it with the included waterproof cap. Coaxial cables of 3C-2V, 5C-2V, and 7C-2V can be connected. The included mounting bracket is compatible with mast diameters from φ40 to φ60 and can be attached to the mast. *For more details, please feel free to contact our company.

  • others
  • Whip Antenna

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
High Sensitivity AM and Shortwave Radio Receiving Antenna WH-2M (MIX)

High Sensitivity AM and Shortwave Radio Receiving Antenna WH-2M (MIX)

One antenna for shortwave, AM, FM, and TV signals! This high-durability, high-sensitivity whip antenna, suitable for outdoor installation, achieves clear reception from all directions!

● The WH-2M(MIX) is an AM whip-type antenna manufactured by Nippon Antenna. ● It is used for radio reception from the AM band to the shortwave band. * A whip antenna is one that has no directionality and can receive and transmit signals from any angle. ● It is a radio sharing antenna that combines an antenna for AM radio and an AM/FM-TV mixer. ● It can receive signals with high sensitivity. ● FM and TV signals can be mixed and output through a single coaxial cable. ● The elements are coated with FRP and made of strong stainless steel, providing excellent durability, and the main body is treated to prevent rust and corrosion. ● The included mounting hardware is compatible with mast diameters from φ22 to φ50 and can be directly mounted on poles or walls. * For more details, please feel free to contact our company.

  • others
  • Whip Antenna

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
400MHz Band Vehicle Antenna HMG-450-5A-09

400MHz Band Vehicle Antenna HMG-450-5A-09

Easy installation! Perfectly attaches to the roof, and with a high gain of 4.15dB, the 3/4λ magnetic antenna transmits signals well!

The HMG-450-5A-09 (HMG4505A09) is a high-gain magnetic antenna for vehicles manufactured by Nippon Antenna, designed for the 400MHz band (3D-2V). It is an antenna that can be mounted on the car's rooftop using a magnet. It is a 3/4λ whip antenna for vehicle-mounted radios. A whip antenna is one that has no directionality and can receive and transmit signals from any angle. This is a high-gain antenna with excellent signal transmission capabilities. The absolute gain is 4.15dB. The package includes the antenna element, magnetic base, and coaxial cable 3D-2V (5m) MG-BA3-09. Note that connectors are not included. It features an attachment method that makes it easy to run the cable, allowing you to connect it to the radio after installation with a separately sold attachment connector. It also has a folding mechanism. For more details, please feel free to contact us.

  • others
  • Whip Antenna

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
WH-260-NJ-09 F=260-275 (set)

WH-260-NJ-09 F=260-275 (set)

Perfect for vehicle-mounted radios! 1/4λ whip antenna set with drilling mount compatible with 260-275MHz (N-J type connector).

● The WH-260-NJ-09 F=260-275 (set) is a 260MHz band vehicle-mounted drilling type antenna without cable, manufactured by Nippon Antenna. * F=260-275 represents the frequency, and (set) means it includes elements, a base, and a coaxial cable. ● It features a drilling mount base with a mounting hole diameter of Φ16mm. ● This is a set product that includes a vehicle-mounted drilling type base (element mounting part M-6 screw) without cable N-JWH-BAN-M6-09 and a 260MHz band vehicle-mounted 1/4λ element (for WH) EL274 (antenna length EL27.4cm). ● It is a λ/4 antenna for radios operating in the frequency range of 260 to 275MHz. * λ (lambda) refers to wavelength. ● It is a whip antenna with a drilling mount type. * A whip antenna is one that has no directivity and can receive and transmit signals from any angle. ● It comes with an N-J type connector and is compatible with a mounting hole diameter of Φ16mm. ● This product complies with safety standards. * For more details, please feel free to contact us.

  • others
  • Whip Antenna

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Waterproof structure 1/4λ whip antenna SWP series

Waterproof structure 1/4λ whip antenna SWP series

169MHz/260MHz/351MHz/430MHz/467MHz/920MHz ※Custom orders for specific frequencies are accepted from small quantities.

- Waterproof structure 1/4λ whip antenna The base section uses an O-ring to maintain waterproofing. - Custom orders available from small quantities We accept custom orders for specific frequencies starting from small quantities. Please contact us. - Stainless steel element The element is made of φ2mm stainless steel (spring material).

  • Radios, walkie-talkies, and intercoms
  • Information and communication equipment and infrastructure
  • Whip Antenna

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Shape Memory Alloy Element Whip Antenna [NTWP Series]

Shape Memory Alloy Element Whip Antenna [NTWP Series]

142MHz/169MHz/260MHz/351MHz/430MHz/467MHz/920MHz ※Custom frequency options available.

- Waterproof structure 1/4λ whip antenna The base section is filled with a silicone resin-based adhesive to maintain waterproofing. - Shape memory alloy element The element is made of φ1mm shape memory alloy. - Custom orders available from small quantities Custom orders for specific frequencies are accepted from small quantities. Please contact us.

  • Radios, walkie-talkies, and intercoms
  • Information and communication equipment and infrastructure
  • Whip Antenna

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Mobile station vehicle-mounted antenna HMG-260-09EL

Mobile station vehicle-mounted antenna HMG-260-09EL

A capacity-grounded 3λ/4 whip antenna for use in municipal digital mobile communications and fire emergency digital mobile communications in the 260 MHz band.

The HMG-260-09EL (HMG26009EL) is a high-gain element (MP type) for vehicles manufactured by Nippon Antenna, designed for the 260MHz band. It is an antenna for mobile stations in digital public radio systems, specifically for municipal digital mobile communications and emergency services. This is a capacitive grounded 3λ/4 whip antenna for the 260MHz band. * A whip antenna is defined as an antenna that has no directivity and can receive and transmit signals from any angle. It is used in combination with a separately sold base. - When combined with the base MG-BA3-MJ-2, it becomes the 260MHz band high-gain magnetic mount antenna (5D-2V) HMG-260B-09 F=260-275 (set). - When combined with the base MG-BA5-MJ-2, it also becomes the 260MHz band high-gain magnetic mount antenna (5D-2V) HMG-260B-09 F=260-275 (set). The supported frequency range is 260 to 275MHz. The connector is MP. Included accessories: Instruction manual. * For more details, please feel free to contact us.

  • others
  • Whip Antenna

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Antenna for 150MHz band radio equipment WH-150-3HA-09

Antenna for 150MHz band radio equipment WH-150-3HA-09

Antenna for a 150MHz band radio device with a hole-mounting installation.

The WH-150-3HA-09 (WH1503HA09) is a rooftop whip antenna (hole mount type) manufactured by Nippon Antenna for the 150MHz band. It is an antenna for radio equipment operating in the 150MHz band. The element is bent, with a 65-degree angle in the middle of the element. It is a whip antenna that is mounted by drilling a hole. The mounting hole diameter is φ23mm, and the mounting plate thickness is 15mm or less. The installation location is on the car's rooftop. * A whip antenna is one that has no directivity and can receive and transmit signals from any angle. It features an NJ connector. It is designed for a specific frequency within the 150MHz range. Please specify the fo (center frequency) in MHz when placing your order. It is a product that complies with safety standards. It is made to order. Please inquire about the delivery time. Included accessories: One instruction manual. There are also models available with a straight NJ connector (WH-150-3H-09) and an L-type NJ connector (WH-150-2H-09) that do not have a bent element. * For more details, please feel free to contact us.

  • others
  • Whip Antenna

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Antenna for 150MHz band radio equipment WH-150-3H-09

Antenna for 150MHz band radio equipment WH-150-3H-09

Antenna for a 150MHz band radio device with a hole-mounting installation.

The WH-150-3H-09 (WH1503H09) is a whip antenna (through-hole type) for rooftop use in the 150MHz band, manufactured by Nippon Antenna. It is an antenna for radios operating in the 150MHz band. This is a whip antenna that is mounted by drilling a hole. The mounting hole on the vehicle should be φ23mm, with a mounting plate thickness of 15mm or less. The installation location is on the car's rooftop. * A whip antenna is one that has no directionality and can receive and transmit signals from any angle. It features an NJ connector. It is designed for a specified frequency within the 150MHz band. Please specify the fo (center frequency) in MHz when placing your order. This product complies with safety standards. It is a made-to-order product. Please inquire about the delivery time. Included accessories: 1 instruction manual. There are also models available with a straight NJ connector bent at a 60-degree angle (WH-150-3HA-09) and an L-shaped NJ connector (WH-150-2H-09). * For more details, please feel free to contact us.

  • others
  • Whip Antenna

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Designated frequency in the 150MHz band] HGW-150-1PN-09

[Designated frequency in the 150MHz band] HGW-150-1PN-09

150 MHz band λ/2 non-radial type antenna with N-P type connector specification

● HGW-150-1PN-09 (HGW1501PN09) is a 150MHz 1/2λ element (NP type) manufactured by Nippon Antenna. ● It is a λ/2 non-radial type antenna for radio equipment in the 150MHz band. ● Please use it in combination with the separately sold NJ type base for installation. ● Since it is a specified frequency in the 150MHz band, please specify the fo (center frequency) in MHz when placing an order. ● The model number changes with frequency. - HGW-150-1PN-09 140-143: Frequency 140-143MHz - HGW-150-1PN-09 143-146: Frequency 143-146MHz - HGW-150-1PN-09 146-150: Frequency 146-150MHz - HGW-150-1PN-09 150-155: Frequency 150-155MHz - HGW-150-1PN-09 155-160: Frequency 155-160MHz - HGW-150-1PN-09 160-165: Frequency 160-165MHz - HGW-150-1PN-09 165-170: Frequency 165-170MHz * For more details, please feel free to contact us.

  • others
  • Whip Antenna

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Designated frequency in the 150 MHz band: HGB-150-2-09EL

Designated frequency in the 150 MHz band: HGB-150-2-09EL

Garter-mounted 150MHz band vehicle high-gain element.

● The HGB-150-2-09EL is a 150MHz band vehicle-mounted high-gain element (MP type) manufactured by Japan Antenna. ● It is an antenna for vehicle-mounted radios. ● It is an element of a 150MHz band 5λ/8 whip antenna with a garter mount. ● Since the HGB-150-2-09EL is a specified frequency in the 150MHz band, please specify the fo (center frequency) MHz when placing your order. ● Due to the fixed frequency of the HGB-150-2-09EL, there are also products with the following model numbers. These are not made to order. ・HGB-150-2-09EL 150-153: Frequency 150-153MHz ・HGB-150-2-09EL 153-156: Frequency 153-156MHz ・HGB-150-2-09EL 156-160: Frequency 156-160MHz ● There is also the HGB-150-2A-09, which is a set of the HGB-150-2-09EL and RSB-BA3-MJ, and the HGB-150-2B-09, which is a set of the HGB-150-2-09EL and RSB-BA5-MJ. *For more details, please feel free to contact us.*

  • others
  • Whip Antenna

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Rooftop Whip WH-450-1ND-09

Rooftop Whip WH-450-1ND-09

A whip antenna that is mounted by drilling with minimal adverse effects on the vehicle body.

The WH-450-1ND-09 (WH4501ND09) is a rooftop whip antenna (hole-mount type) manufactured by Nippon Antenna for the 400MHz band. It is an antenna for UHF radios. The supported frequency range is 383.35 to 383.45MHz (receiving 399.0625 to 399.45MHz, transmitting 383.0625 to 383.45MHz). It is a whip antenna that requires hole-mount installation. Note that a whip antenna is one that has no directivity and can receive and transmit signals from any angle. This product has a mounting hole of φ16mm. It comes with an N-J connector, and the coaxial cable is sold separately. It includes a ground wire and is designed to have excellent electrical performance regardless of installation location, with minimal adverse effects from the vehicle body. It complies with safety standards. For more details, please feel free to contact our company.

  • acc_1585338311.jpg
  • others
  • Whip Antenna

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Vehicle-mounted gutter element (MP type)] GB-060L-2-09EL

[Vehicle-mounted gutter element (MP type)] GB-060L-2-09EL

Quarter-wave shortened whip antenna with capacity grounding for disaster prevention administrative radio equipment in the 60 MHz frequency band.

The GB-060L-2-09EL (GB-060L209EL) is a 60MHz band vehicle-mounted element (MP type) manufactured by Nippon Antenna. It is a λ/4 shortened whip antenna with a capacity grounding type for disaster prevention administrative radio equipment operating in the 60MHz band. A whip antenna is defined as an antenna that has no directivity and can receive and transmit signals from any angle. It is a designated frequency within the 60MHz band. Please specify the center frequency (fo) in MHz when placing your order. It is designed for gutter mounting and should be used in combination with the separately sold roof side bases RSB-BA3-MJ or RSB-BA5-MJ. It is the same product as the antenna element GB-060L-2A-09. The antenna length is approximately 90cm. The feeding connector is MP. It complies with the European environmental regulation RoHS directive. For more details, please feel free to contact us.

  • others
  • Whip Antenna

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Magnet Mount Vehicle Antenna HMG-450-5B-09

Magnet Mount Vehicle Antenna HMG-450-5B-09

Powerful signal reach! Ideal high-gain antenna for vehicle-mounted wireless systems! Foldable for convenient storage!

The HMG-450-5B-09 (HMG4505B09) is a high-gain magnetic antenna for vehicles manufactured by Nippon Antenna, designed for the 400MHz band (5D-2V). It is an antenna that can be mounted on the car's rooftop using a magnet. It is a 3/4λ whip antenna for vehicle-mounted radios. A whip antenna is one that has no directionality and can receive and transmit signals from any angle. This is a high-gain antenna with excellent signal transmission capabilities. The absolute gain is 4.15dB. It comes with an antenna element, a magnetic base, and a 5D-2V coaxial cable (5m) MG-BA5-09. Note that connectors are not included. It features an attachment method that makes it easy to run cables, allowing you to connect it to the radio after installing a separately sold attachment connector. It also has a folding mechanism. For more details, please feel free to contact us.

  • others
  • Whip Antenna

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[For vehicle use] WH-260B-09 F=260-275 (set)

[For vehicle use] WH-260B-09 F=260-275 (set)

Disaster prevention, fire, and emergency radio compatible! Vehicle-mounted whip antenna set for 260-275MHz band digital radio (drilling type)

The WH-260B-09 F=260-275 (set) is a 260MHz band vehicle-mounted drilling antenna (5D-2V) manufactured by Nippon Antenna. It is an antenna for vehicle radios operating in the 260MHz band, such as digital disaster administrative wireless systems and fire and emergency digital radios. It is a capacitive ground λ/4 whip antenna. * A whip antenna is one that has no directivity and can receive and transmit signals from any angle. * λ (lambda) refers to wavelength. The compatible frequency range is 260MHz to 275MHz. This product includes a 1/4λ element for the 260MHz band (for WH) EL274 and a vehicle-mounted drilling type base (element mounting part M-6 screw (5D-2V 4m) WH-BA5-M6-09). * The connector (attachment connector) is sold separately. * The element mounting part uses an M-6 screw. The installation location is the rooftop. Drilling installation work is required, and it is compatible with a mounting hole diameter of Φ16mm. * For more details, please feel free to contact us.

  • others
  • Whip Antenna

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Japan Antenna Co., Ltd. Whip Antenna WH-08/2G-L

Japan Antenna Co., Ltd. Whip Antenna WH-08/2G-L

Compatible with 3G, 4G, LPWA, WiFi, and Bluetooth! A compact external antenna with RoHS-compliant SMA connector type, ideal for IoT devices.

The WH-08/2G-L (WH082GL) is a whip antenna manufactured by Nippon Antenna. * A whip antenna is an antenna that has no directionality and can receive and transmit signals from any angle. The WH-08/2G-L is an external antenna for IoT that supports carriers as well as 3G / 4G LTE / LPWA (920MHz), WiFi, and Bluetooth. It has obtained construction design certification. It is a directly mounted antenna. The WH-08/2G-L connector is an SMA-P connector, so it can be connected if the connector on the housing side is an SMA-J connector. It complies with the European environmental regulation RoHS directive. * For more details, please feel free to contact us.

  • others
  • Whip Antenna

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
ZM2407/ZM2405S/ZM2402S

ZM2407/ZM2405S/ZM2402S

Lightweight and high-strength fiberglass cover adopted 2.4GHz band whip antenna.

ZM2407S: 6.2dBi approximately 289mm ZM2405S: 4.8dBi approximately 193mm ZM2402S: 2.14dBi approximately 120mm Fiberglass cover Adopts a lightweight and high-strength fiberglass cover SMA connector Uses SMAP (plug) connector

  • Information and communication equipment and infrastructure
  • Radios, walkie-talkies, and intercoms
  • Whip Antenna

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
5GHz Band Vehicle Whip Antenna [ZM Series]

5GHz Band Vehicle Whip Antenna [ZM Series]

Lightweight and high-strength fiberglass cover adopted whip antenna for 5470MHz to 5725MHz.

- Compatible with IEEE802.11a/n/ac (5GHz) This is a vehicle-mounted whip antenna compatible with the wireless LAN standards IEEE802.11a/n/ac (5GHz). - Fiberglass Cover Adopts a lightweight and high-strength fiberglass cover. - SMA Connector Uses an SMA (plug) connector. - Easy and Convenient Vehicle Operation (Magnetic Base) By using it in conjunction with the G6000S series, it enables easy and convenient vehicle operation.

  • Radios, walkie-talkies, and intercoms
  • Information and communication equipment and infrastructure
  • Whip Antenna

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Designated frequency in the 150MHz band] HGW-150-1PN-09

[Designated frequency in the 150MHz band] HGW-150-1PN-09

150MHz 1/2λ element for radio equipment (NP type)

● The HGW-150-1PN-09 is a 150MHz 1/2λ element (NP type) made by Japan Antenna. ● It is a λ/2 non-radial type antenna for radio equipment in the 150MHz band. ● The model number changes depending on the frequency. Please choose from the model numbers below. ・HGW-150-1PN-09 140-143: Frequency 140-143MHz ・HGW-150-1PN-09 143-146: Frequency 143-146MHz ・HGW-150-1PN-09 146-150: Frequency 146-150MHz ・HGW-150-1PN-09 150-155: Frequency 150-155MHz ・HGW-150-1PN-09 155-160: Frequency 155-160MHz ・HGW-150-1PN-09 160-165: Frequency 160-165MHz ・HGW-150-1PN-09 165-170: Frequency 165-170MHz ● It has an NP type connector. ● Please use it in combination with the separately sold NJ type base for installation. ● Since it is a specified frequency in the 150MHz band, please specify fo (center frequency) MHz when placing your order. *For more details, please feel free to contact us.

  • others
  • Whip Antenna

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
ZM0925S/ZM0922S

ZM0925S/ZM0922S

Lightweight and high-strength fiberglass cover adopted 920MHz band whip antenna.

ZM0925S: 4.8dBi approximately 455mm ZM0922S: 2.14dBi approximately 193mm Fiberglass cover Adopts a lightweight and high-strength fiberglass cover SMA connector Uses SMAP (plug) connector

  • Information and communication equipment and infrastructure
  • Radios, walkie-talkies, and intercoms
  • Whip Antenna

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
ZM0925S-169/ZM0922S-169

ZM0925S-169/ZM0922S-169

Adoption of a lightweight and high-strength fiberglass cover dual whip antenna for 169MHz/920MHz bands.

ZM0925S-169: [169MHz] 2.14dBi / [920MHz] 4.8dBi approximately 455mm ZM0922S-169: [169MHz] 2.14dBi / [920MHz] 2.14dBi approximately 455mm Fiberglass cover Adopts a lightweight and high-strength fiberglass cover SMA connector Uses SMAP (plug) connector

  • Information and communication equipment and infrastructure
  • Radios, walkie-talkies, and intercoms
  • RFID/IC tags
  • Whip Antenna

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Related Categories of Whip Antenna

COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.